Omron ZX2-LDA41 User Manual page 75

Button
Display
Operation
[Change numeric value]
[Numeric
Press to set.
value before
change]
Set any value.
[Change numeric value]
[Numeric
Press to set.
value after
change]
Set any value.
6
Optional
Hold
Button
Display
Operation
ZX2 User's Manual
Description of Operation
Press the button to display
.
Press the button to enable
setting of S2-Before.
Press the button to move
the digit, press the button to
change the numeric value, and
set the measured value before
S2 is changed.
Press the button to apply
the numeric value of S2-Before.
Press the button to display
.
Press the button to enable
setting of S2-After.
Press the button to move
the digit, press the button to
change the numeric value, and
set the measured value after S2
is changed.
Press the button to apply
the numeric value of S2-After.
Set this item to hold measured values during the measurement
period according to preset hold conditions.
Description of Operation
Press the button to display
.
Explanation of
Selection Menu
2
1
-1
-2
S1
* If the button is pressed
when the cursor is at the
right-most digit or the
button is pressed when the
cursor is at the left-most digit,
the setting will be canceled.
Explanation of
Selection Menu
Default value: OFF
Eccentricity and Surface Deflection
CONTENTS
Before
INTRODUCTION
After
PREPARATION
FOR
MEASUREMENT
S2
FLOW OF
OPERATION
BASIC
SETUP
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Positioning
Eccentricity
and Surface
Deflection
DETAILED
SETTINGS
TROUBLE-
SHOOTING
SPECIFI-
CATIONS
INDEX
SETTING
TRANSITION
CHARTS
75