Checking The Steering System; Checking The Gear Shift And Throttle Operation - Yamaha E60HWD Service Manual

w
The shift/throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
b.
NOTE:
Check the throttle valve fully open, after set-
ting the remote control cables.

Checking the steering system

1. Check the steering friction for proper
adjustment.
b
a
NOTE:
9 To increase the friction, turn the friction
adjusting bolt in direction a.
9 To decrease the friction, turn the friction
adjusting bolt in direction b.
2. Check that the steering operates smooth-
ly.
69D5G11
b
6D430227
69D10045
69D10170
3. Check that there is no interference with
wires or hoses when the outboard motor
is steered.
Checking the gear shift and throttle
operation
1. Check that the gear shift operates
smoothly when the shift lever or remote
control lever is shifted from neutral to for-
ward or reverse.
2. Check that the throttle operates smoothly
when the throttle grip (tiller handle model)
is turned from the fully closed position to
the fully open position a.
Check that the throttle operates smoothly
when the remote control lever (remote
control model) is shifted from forward or
reverse to the fully open positions a.
R
N
F
N
F
a
Predelivery checks
69D10180
a
69D10190
R
a
6F610120
1-8
1
2
3
4
5
6
7
8
9