Checking The Steering System; Checking The Gearshift And Throttle Operation; Checking The Tilt System - Yamaha FT50C Service Manual

3. Check that the alignment mark c is
aligned with the mark d. Adjust if neces-
sary.
CAUTION:
The shift/throttle cable joint must be
screwed in a minimum of 8.0 mm (0.31 in)
e.

Checking the steering system

1. Check the steering friction for proper
adjustment.
2. Check the steering for smooth operation.
62Y5A11
3. Check that there is no interference with
wires or hoses when the outboard motor
is steered.
Checking the gearshift and throttle
operation
1. Check
smoothly when shifting from neutral into
forward and reverse.
S62Y1530
2. Check that the throttle control lever con-
tacts the respective stoppers when the
throttle control lever is closed or fully
open.

Checking the tilt system

1. Check that the outboard motor can be
smoothly tilted up and down by operating
the power trim and tilt unit.
2. Check that there is no abnormal noise
produced when the outboard motor is
tilted up and down.
3. Check that there is no interference with
wires and hoses when the tilted-up motor
is steered.
Predelivery checks
that the gearshift
1
2
3
operates
4
5
6
7
8
9
1-28