Oracle Exadata Storage Server X7-2 EF Service Manual page 92

Identify and Remove an M.2 Flash SSD
3. Perform the steps to remove the flash riser board containing the M.2 flash SSD
from the server.
For instructions, see
antistatic mat.
4. Using your fingers, push the plastic retainer clip through the flash riser board to
release the M.2 flash SSD from the riser board. [1].
5. Remove the plastic retainer clip from the M.2 flash SSD.
6. Remove the M.2 flash SSD from the riser board [2].
Lift up on the end of the M.2 flash SSD where the plastic retainer clip was
a.
removed by one-half to one inch.
Gently slide the M.2 flash SSD card toward the back of the riser board and
b.
out of the connector to disengage the SSD contacts from the riser board
socket.
Place the M.2 flash SSD on an antistatic mat.
Related Information
"Install an M.2 Flash SSD" on page 93
■
92 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
"Remove a Flash Riser Board" on page 87. Place the riser board on an