Oracle Exadata Storage Server X7-2 EF Service Manual page 27

Depending on the component, you might need to clear the fault in Oracle ILOM. Generally,
components that have a FRU ID clear the fault automatically.
Related Information
"Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface" on page 27
■
Troubleshoot Hardware Faults Using the Oracle ILOM Web
Interface
The screens shown in this procedure might differ from those for your server.
Note -
This procedure uses the basic troubleshooting steps described in
Process" on page 26.
Use this procedure to troubleshoot hardware faults with the Oracle ILOM web interface and, if
necessary, prepare the server for service.
This procedure provides one basic approach to troubleshooting hardware faults. It uses
Note -
the Oracle ILOM web interface. However, you can perform procedure using the Oracle ILOM
command-line interface (CLI). For more information about the Oracle ILOM web interface and
CLI, refer to the Oracle ILOM documentation.
Log in to the server SP Oracle ILOM web interface.
1.
Open a browser and direct it using the IP address of the server SP.
a.
b. At the Login screen, enter a user name (with administrator privileges) and
password.
The Summary Information page appears. The Status section of the Summary Information
page provides information about the server subsystems, including:
Processors
■
Memory
■
Power
■
Cooling
■
Storage
■
Networking
■
Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
"Basic Troubleshooting
Troubleshooting and Diagnostics 27