Oracle Exadata Storage Server X7-2 EF Service Manual page 88

Remove a Flash Riser Board
b. Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis. See
c. Remove the server top cover. See
Cover" on page
2. To remove the flash riser board, do the following:
Rotate both riser board socket ejectors outward as far as they go.
a.
Note -
ejectors.
b. Carefully lift the riser board straight up to remove it from the sockets.
Place the riser board on an antistatic mat. If required, perform the procedures for removing
the M.2 flash SSD from the flash riser board. For instructions, see
an M.2 Flash SSD" on page
Related Information
"Install a Flash Riser Board" on page 89
■
88 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
"Take Antistatic Measures" on page
64.
The green power LED on the riser board is extinguished when you open the socket
"Remove the Server Top
91.
63.
"Identify and Remove