Oracle Exadata Storage Server X7-2 EF Service Manual page 44

Assign Serial Port Output Using the Oracle ILOM CLI
"Assign Serial Port Output Using the Oracle ILOM Web Interface" on page 44
■
Assign Serial Port Output Using the Oracle ILOM CLI
1. Open an SSH session, and at the command line, log in to the SP Oracle ILOM
CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
The ipaddress is the IP address of the server SP.
For more information, refer to "Accessing Oracle ILOM" in the
Administration
The Oracle ILOM CLI prompt (->) appears.
2. To set the serial port owner, type:
->
set /System/SP/serial/portsharing owner=host
Note -
3. Connect a serial host to the server.
Assign Serial Port Output Using the Oracle ILOM Web
Interface
1. Log in to the SP Oracle ILOM web interface.
Open a web browser and direct it using the IP address of the server SP. Log in as root or a
user with administrator privileges. Refer to "Accessing Oracle ILOM" in the Oracle X7 Series
Servers Administration Guide.
The Summary Information page appears.
In the Oracle ILOM web interface, on the navigation menu on the left side of the
2.
screen, select ILOM Administration → Connectivity.
Click the Serial Port tab.
3.
The Serial Port Settings page appears.
Note -
44 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
ipaddress
Guide.
The serial port sharing value, by default, is owner=SP.
The serial port sharing setting, by default, is Service Processor.
Oracle X7 Series Servers