Oracle Exadata Storage Server X7-2 EF Service Manual page 238

BIOS Advanced Menu Selections
Setup Options
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
Gateway
Target Name
Target IP address
Target Port
Boot LUN
Authentication Type
CHAP Type
CHAP Name
CHAP Secret
Delete Attempts
Change Attempt Order
238 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
Options
Disabled/Enabled
NA
NA
NA
NA
0.0.0.0
CHAP/None
One Way/Mutual
NA
NA
NA
NA
Defaults
Disabled
0.0.0.0
0.0.0.0
0.0.0.0
NA
None
3260
0
CHAP
One Way
None
None
NA
NA
Description
0ABBCCF07901 by inputting
F07901
Enable or disable DHCP.
Set initiator IP address in dotted-
decimal notation.
Set initiator subnet mask IP
address in dotted-decimal
notation.
Set initiator gateway IP address
in dotted-decimal notation.
The worldwide unique name of
the target. Only IQN format is
accepted.
Set target IP address in dotted-
decimal notation.
Change target port number.
Set the hexadecimal
representation of the boot logical
unit number (LUN).
Example: 4752-3A4F-6b7e-
2F99
Define the Challenge-
Handshake Authentication
Protocol (CHAP). Available
settings are CHAP, Kerberos,
and None.
Set CHAP type to either One
Way or Mutual.
Set CHAP name.
Set the CHAP secret password.
The secret length range is 12 to
16 bytes.
Delete one or more attempts.
Change the order of attempts.
Use arrow keys to select the
attempt, then press plus or minus
(+/-) keys to move the attempt
up/down in the attempt order
list.