Install the Front LED Indicator Module
Note -
Oracle Storage 12 Gb SAS PCIe RAID HBA, Internal card in PCIe slot 11 to access the LED
indicator module motherboard cable connection. See
Return the server to operation.
3.
a.
Install the server top cover.
See
Return the server to the normal rack position.
b.
See
c.
Reconnect the power cords to the power supplies, and power on the server.
See
Server" on page
Verify that the power supply AC OK LED is lit.
d.
150
Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
On the HC server, you might need to disconnect the SAS cable connections from the
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Power and Data Cables" on page 192
193.
"Servicing SAS Cables" on page
189.
191.
and
"Power On the
167.