Oracle Exadata Storage Server X7-2 EF Service Manual page 171

When attaching SAS cables, ensure that you match the numbers on the SAS cables with the
SAS connectors on the disk backplane and on the HBA card. Use the following table to ensure
proper SAS connections between the storage drive backplane and the HBA card.
HBA Card
Oracle Storage 12 Gb SAS PCIe RAID
HBA, Internal
4. Return the server to operation.
a. Install the fan tray.
See "Install the Fan Tray" on page
b. Install the fan modules.
See "Install a Fan Module" on page
c. Install the air baffle.
See "Install the Air Baffle" on page
d. Install the server top cover.
See "Install the Server Top Cover" on page
e. Return the server to the normal rack position.
See "Return the Server to the Normal Rack Position" on page
Reconnect the power cords to the power supplies, and power on the server.
f.
See "Reconnect Power and Data Cables" on page 192
Server" on page
Verify that the power supply AC OK LED is lit.
g.
Related Information
"Install the Internal HBA Card and HBA Super Capacitor" on page 163
■
"Remove SAS Storage Drive Cables" on page 167
■
PCIe Slot Location
11
78.
75.
97.
193.
Install SAS Storage Drive Cables
HBA Connector Disk Backplane
Connector
1 1
2 2
3 3
189.
191.
and "Power On the
Servicing SAS Cables
Storage Drives (HC
only)
0, 1, 2, 3
4, 5, 6, 7
8, 9, 10, 11
171