1.
Lower the fan tray into the server [1].
2.
Using a Torx T25 screwdriver, tighten the three spring-mounted screws that
secure the fan tray to the server chassis [2].
Continue with the next step in the service procedure.
3.
Related Information
"Install a Fan Module" on page 75
■
"Servicing the Disk Backplane" on page 137
■
"Servicing SAS Cables" on page 167
■
"Servicing the Motherboard Assembly" on page 173
■
Install the Fan Tray
Servicing Fan Modules
79