Related Information
"Server System-Level Status Indicators" on page 31
■
"Power Down the Server Gracefully Using the Oracle ILOM CLI" on page 54
■
"Power Down the Server Gracefully Using the Oracle ILOM Web Interface" on page 55
■
"Power On the Server" on page 193
■
Power Down the Server for Immediate Shutdown Using the
Oracle ILOM CLI
Caution -
This procedure quickly forces the server Main power off. An immediate power-off
might corrupt the system data. Therefore, use this procedure to power down the server only
after attempting the graceful power-down procedure.
Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
1.
account.
Oracle ILOM displays the default command prompt (->), indicating that you have successfully
logged in to Oracle ILOM.
2.
From the CLI prompt, type the following command:
->
stop -f /System
The server powers down immediately to Standby power mode, and the System OK LED on the
front panel begins blinking. See
Disconnect the power and data cables from the server.
3.
See
"Disconnect Cables From the Server" on page
When you power down the server using Oracle ILOM, the server enters Standby
Caution -
power mode. Power is still directed to the service processor remote management subsystem and
power supply fans. To completely power off the server, you must disconnect the power cords
from the power supplies.
Related Information
"Power Down the Server for Immediate Shutdown Using the On/Standby
■
Button" on page 59
"Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web
■
Interface" on page 58
Power Down the Server for Immediate Shutdown Using the Oracle ILOM CLI
"Server System-Level Status Indicators" on page
59.
31.
Preparing for Service
57