Oracle Exadata Storage Server X7-2 EF Service Manual page 184

Install the Motherboard Assembly
Caution -
which they were removed during the motherboard removal procedure; otherwise, the server key
identity properties (KIP) data might be lost. When a server requires service, the KIP is used by
Oracle to verify that the warranty on the server is not expired. For more information on KIP, see
"Key Identity Properties (KIP) Automated Update" on page
Power supplies
■
See
PCIe cards
■
See
SAS storage drive cables (if present)
■
See
Fan tray
■
See
Fan modules
■
See
Air baffle
■
See
6. If present on the HC server, install the Oracle Storage 12 Gb SAS PCIe RAID
HBA, Internal card and its associated super capacitor.
See "Install the Internal HBA Card and HBA Super Capacitor" on page
Note -
squeezing the plastic hinges together and inserting the tray into the chassis.
7. Return the server to operation.
a. Install the server top cover.
See
Return the server to the normal rack position.
b.
See
Reconnect the power cords to the power supplies, and power on the server.
c.
See
Server" on page
184 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
When reinstalling power supplies, it is important to reinstall them into the slots from
"Install a Power Supply" on page
"Install a PCIe Card" on page
"Install SAS Storage Drive Cables" on page
"Install the Fan Tray" on page
"Install a Fan Module" on page
"Install the Air Baffle" on page
Before you install the HBA super capacitor, install the HBA super capacitor tray by
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Power and Data Cables" on page 192
193.
51.
84.
115.
170.
78.
75.
97.
189.
and
163.
191.
"Power On the