Oracle Exadata Storage Server X7-2 EF Service Manual page 178

Remove the Motherboard Assembly
DIMMs
■
See
Note -
Performing a one-to-one replacement of DIMMs significantly reduces the possibility that
DIMMs are not installed in the wrong slots. If you do not reinstall the DIMMs in the same
slots, server performance might be reduced and some DIMMs might not be used.
M.2 flash riser SSDs
■
See
Board" on page
Remove the processors from the failed motherboard.
8.
See "Identify and Remove a Processor" on page
9. Remove the processor socket covers from the replacement motherboard and
install the processors.
a. Grasp the processor socket cover finger grips (labeled REMOVE) and lift the
socket cover up and off the processor socket.
178 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
"Identify and Remove a DIMM" on page 105
Install the DIMMs only in the slots (connectors) from which they were removed.
"Remove a Flash Riser Board" on page 87
89.
and "Install a DIMM" on page
and "Install a Flash Riser
123.
107.