Oracle Exadata Storage Server X7-2 EF Service Manual page 142

Install the Disk Backplane
3. Using a Torx T15 screwdriver, tighten the right-side and left-side spring-mounted
screws to secure the disk backplane to the chassis [4].
Reconnect the cables to the disk backplane.
4.
a. Reconnect the auxiliary signal cable to the disk backplane [5].
b. Reconnect the temperature signal cable to the disk backplane [5].
c. Reconnect the three SAS cables to the disk backplane [6].
To ensure proper SAS cable connections, see
Cables" on page
d. Reconnect the power cable to the disk backplane [6].
5. Return the server to operation.
a. Install the fan tray.
See
Install the fan modules.
b.
See
c. Install the air baffle.
See
d. Install the server top cover.
See
e. Install all storage drives into the storage drive cage.
See
Return the server to the normal rack position.
f.
See
g. Reconnect the power cords to the power supplies, and power on the server.
See
Server" on page
142 Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
170.
"Install the Fan Tray" on page
"Install a Fan Module" on page
"Install the Air Baffle" on page
"Install the Server Top Cover" on page
"Install a Storage Drive" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Power and Data Cables" on page 192
193.
"Install SAS Storage Drive
78.
75.
97.
189.
71.
and "Power On the
191.