Install a Flash Riser Board
Caution -
in the riser board is aligned with the connector key in the connector socket. If the notch is not
aligned, damage to the riser board might occur.
Rotate the riser board socket ejectors inward until the ejector tabs lock the
d.
riser board in place.
3.
(Optional) Repeat
4.
Return the server to operation.
Install the server top cover.
a.
See
b.
Return the server to the normal rack position.
See
Related Information
"Remove a Flash Riser Board" on page 87
■
90
Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018
If the riser board does not easily seat into the connector socket, verify that the notch
Step 2
to install a second flash riser board into the server.
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
189.
191.