Oracle Exadata Storage Server X7-2 EF Service Manual page 31

Hide thumbs Also See for Exadata Storage Server X7-2 EF:
Table of Contents

Advertisement

2. After a few minutes, the main System OK LED slowly flashes the standby blink pattern
(0.1 seconds on, 2.9 seconds off), indicating that the SP is ready for use. In Standby power
mode, the server is not initialized or fully powered on at this point.
When powering on the server (either by the On/Standby button or Oracle ILOM), the server
boots to Main power mode:
1. The System OK LED blinks slowly (0.5 seconds on, 0.5 seconds off), and the SP OK LED
remains lit (no blinking).
2. When the server successfully boots, the System OK LED remains lit. When the System OK
LED and the SP OK LED indicators remain lit, the server is in Main power mode.
The green System OK LED indicator and the green SP OK indicator remain lit (no
Note -
blinking) when the server is in a normal operating state.
Server System-Level Status Indicators
There are seven system-level status indicators (LEDs), some of which are located on both the
server front panel and the back panel. For the location of the status indicators, see
Back Panel Components" on page
Status Indicator
Icon
Name
Locate Button/
LED
Fault-Service
Required
System OK
Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
16. The following table describes these indicators.
Color
State and Meaning
White
Indicates the location of the server.
■ OFF – Server is operating normally.
■ FAST BLINK (250 ms) – Use Oracle ILOM to
activate this LED indicator to enable you to locate a
particular system quickly and easily.
■ Pressing the Locate button toggles the LED indicator
fast blink on or off.
Amber
Indicates the fault state of the server.
■ OFF – The server is operating normally.
■ STEADY ON – A fault is present on the server. This
LED indicator lights whenever a fault indicator lights
for a replaceable component on the server.
Note -
When this LED indicator is lit, a system console
message might appear that includes a recommended
service action.
Green
Indicates the operational state of the chassis.
"Front and
Troubleshooting and Diagnostics
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exadata storage server x7-2 hc

Table of Contents