Setting The Inversion Control Of The Input Sources For Mixer A; Setting The Inversion Control For Channel 1 A Of Mixer A - evertz 7721AE8-DEE-HD Manual

6.7.3. Setting the Inversion Control of the Input Sources for Mixer A

Audio Processor
MAIV
Ch1 A Invert
Ch1 B Invert
Ch2 A Invert
Ch2 B Invert
Ch3 A Invert
Ch3 B Invert
Ch4 A Invert
Ch4 B Invert
Ch5 A Invert
Ch5 B Invert
Ch6 A Invert
Ch6 B Invert
Ch7 A Invert
Ch7 B Invert
Ch8 A Invert
Ch8 B Invert
Ch9 A Invert
Ch9 B Invert
Ch10 A Invert
Ch10 B Invert
Ch11 A Invert
Ch11 B Invert
Ch12 A Invert
Ch12 B Invert
Ch13 A Invert
Ch13 B Invert
Ch14 A Invert
Ch14 B Invert
Ch15 A Invert
Ch15 B Invert
Ch16 A Invert
Ch16 B Invert
6.7.3.1.

Setting the Inversion Control for Channel 1 A of Mixer A

The parameters for each pair (A and B) for all 16 channels are the same. For the sake of simplicity in the
manual only the menus for Channel 1 Input A for Mixer A will be described.
Audio Processor
MAIV
1AIV
Normal
Invert
7721AE8-DEE-HD HD-SDI/SD-SDI Audio Embedder with Dolby Encoder
This control allows the user to set the inversion control of the
input sources for each pair (A and B) of the 16 channels of
Mixer A.
1AIV
1BIV
This allows the user to invert audio pairs if desired. This control
2AIV
is useful in cases of analog wiring errors, etc.
2BIV
3AIV
3BIV
4AIV
4BIV
5AIV
5BIV
6AIV
6BIV
7AIV
7BIV
8AIV
8BIV
9AIV
9BIV
AAIV
ABIV
BAIV
BBIV
CAIV
CBIV
DAIV
DBIV
EAIV
EBIV
FAIV
FBIV
GAIV
GBIV
This parameter sets the inversion control for Channel 1 Input A
of Mixer A. When set to Normal, the pairs will remain as is.
When set to Invert, the pairs will be inverted.
NRML
For passing non-PCM data, this control must be set to Normal.
INVT
Revision 1.2
7700 MultiFrame Manual
Page-27