Wireless Relay Box (Hc60Ng) - Honeywell ATC928G3000 Manual

Programmable
Thermostat (CM700RF)
To bind a Wireless Relay Box (HC60NG) to a Programmable
Thermostat (CM700RF) to control a boiler...
On the Wireless Relay Box
Press and hold the button for 15 seconds
1
(until the red LED blinks rapidly) to
clear any previous binding data
Press and hold the button again for 5
2
seconds (until the red LED blinks slowly)
On the Programmable Thermostat
Press the OFF button
3
Press and hold the
4
buttons together for approximately 3
seconds until 'InSt' is displayed
Programmable Thermostat (CM700RF)
, and
Wireless Relay Box
Press to send the binding signal
5
to the Wireless Relay Box
The LED on the Wireless Relay Box should stop
blinking and turn OFF. If not go back and re-bind.
(HC60NG)
51