Wireless Relay Box (Bdr91) Sundial Valve - Honeywell ATC928G3000 Manual

evohome Controller
(ATC928G2000)
To bind a Wireless Relay Box (BDR91) to an evohome Controller
(ATC928G2000) to control a Sundial valve (hot water or heating)...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press SYSTEM DEVICES
3
Press the button next to
4
Press STORED HOT WATER
5
Press HOT WATER VALVE BINDING
6
or HEATING VALVE BINDING
On the Wireless Relay Box
Press and hold the button for 15 seconds
7
(until the red LED blinks rapidly) to
clear any previous binding data
evohome Controller (ATC928G2000)
for 5 seconds
"Sundial Valves:"
Wireless Relay Box
(BDR91) Sundial Valve
Press and hold the button again for 5
8
seconds (until the red LED blinks slowly)
On the evohome Controller
Press the bind button
9
You should receive a SUCCESS message
on the evohome Controller and the LED on
the Wireless Relay Box should stop blinking
and turn OFF. If not go back and re-bind.
33