Wireless Relay Box (Bdr91) Zone Valve - Honeywell ATC928G3000 Manual

evohome Controller
(ATC928G2000)
To bind a Wireless Relay Box (BDR91) to an evohome
Controller (ATC928G2000) "zone valve" zone...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press ZONE SETTINGS
3
Press EDIT ZONE
4
Press on the required zone
5
Press the button next to "Application:"
6
ZONE VALVES
Press
7
On the Wireless Relay Box
Press and hold the button for 15 seconds
8
(until the red LED blinks rapidly) to
clear any previous binding data
34
Wireless connectivity Guide
for 5 seconds
Wireless Relay Box
(BDR91) Zone Valve
Press and hold the button again for 5
9
seconds (until the red LED blinks slowly)
On the evohome Controller
Press the bind button
10
You should receive a SUCCESS message
on the evohome Controller and the LED on
the Wireless Relay Box should stop blinking
and turn OFF. If not go back and re-bind.