Radiator Controller (Hr92) - Honeywell ATC928G3000 Manual

Wi-Fi evohome Controller
(ATC928G3000)
To bind a Radiator Controller (HR92) to a Wi-Fi evohome
Controller (ATC928G3000) "radiator valve" zone...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press ZONE CONFIGURATION
3
Press on the required zone
4
Press RF DEVICE BINDING
5
Press the forward arrow
6
On the Radiator Controller
Press the button once − it
7
UNBOUND
should display
Press and hold the
8
5 seconds until it displays
8
Wireless connectivity Guide
for 5 seconds
button for a further
BIND
Radiator Controller
Press the button once – it
9
should display BINDING
On the evohome Controller
Press the bind button
10
You should receive a SUCCESS message on
both the evohome Controller and the Radiator
Controller. If not go back and re-bind.
(HR92)