Wireless Relay Box (Hc60Ng) - Honeywell ATC928G3000 Manual

Wi-Fi evohome Controller
(ATC928G3000)
To bind a Wireless Relay Box (HC60NG) to a Wi-Fi evohome
Controller (ATC928G3000) to control a boiler...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press SYSTEM DEVICES
3
Press BOILER CONTROL
4
Press WIRELESS RELAY BOX
5
On the Wireless Relay Box
Press and hold the button for 15 seconds
6
(until the red LED blinks rapidly) to
clear any previous binding data
Press and hold the button again for 5
7
seconds (until the red LED blinks slowly)
18
Wireless connectivity Guide
for 5 seconds
Wireless Relay Box
On the evohome Controller
Press the bind button
8
You should receive a SUCCESS message
on the evohome Controller and the LED on
the Wireless Relay Box should stop blinking
and turn OFF. If not, go back and re-bind.
(HC60NG)