Table of Contents
Advertisement
CHAPTER
27
The AutoRAE 2 Controller can communicate wirelessly with a PC running Safety Suite Device
Configurator (SSDC), and operates in the same manner (that is, the wireless connection
substitutes for a hardwired connection). This requires purchasing an optional Wi-Fi Adapter
and configuring it properly for your network. It also requires configuration of the AutoRAE 2
Controller.
Software and firmware requirements:
Safety Suite Device Configurator (SSDC) V3.1.0.2837 (or newer)
l
AutoRAE 2 controller firmware V1.20 (or newer)
l
AutoRAE 2 Utility V1.02 Build 105 (or newer)
l
Note: This procedure has been tested with NetGear's WNCE2001 Universal Wi-Fi Internet
Adapter (or equivalent)
AutoRAE 2
WIRELESS OPERATION
123
User Manual
Advertisement
Table of Contents
