Wireless Relay Box (Bdr91); The Led On The Wireless Relay Box Should Stop - Honeywell ATC928G3000 Manual

Programmable
Thermostat (CM900RF)
To bind a Wireless Relay Box (BDR91) to a Programmable
Thermostat (CM900RF) to control a boiler...
On the Wireless Relay Box
Press and hold the button for 15 seconds
1
(until the red LED blinks rapidly) to
clear any previous binding data
Press and hold the button again for 5
2
seconds (until the red LED blinks slowly)
On the Programmable Thermostat
Move the setting slider to the
3
Press and hold the
4
together for approximately 3 seconds until
'InSt' and 'CONTROL BINDING' is displayed
46
Wireless connectivity Guide
OFF position
, and buttons
Wireless Relay Box
Press to send the binding signal
5
to the Wireless Relay Box

The LED on the Wireless Relay Box should stop

blinking and turn OFF. If not go back and re-bind.
(BDR91)