Wireless Cylinder Thermostat (Cs92) - Honeywell ATC928G3000 Manual

evohome Controller
(ATC928G2000)
To bind a Wireless Cylinder Thermostat (CS92) to an evohome
Controller (ATC928G2000) to control a hot water cylinder...
On the evohome Controller
Press and hold SETTINGS
1
Press the green tick
2
Press SYSTEM DEVICES
3
Press the button next to
4
Press STORED HOT WATER
5
Press HOT WATER SENSOR BINDING
6
evohome Controller (ATC928G2000)
for 5 seconds
"Sundial Valves:"
Wireless Cylinder
Thermostat (CS92)
On the Wireless Cylinder Thermostat
Press and hold the button for 5
7
seconds. The green light should come
on and the red light should flash
Press the button again
8
You should receive a SUCCESS message on
the evohome Controller and the LED on the
Wireless Cylinder Thermostat should stop blinking
and turn OFF. If not go back and re-bind.
31