Table 2-2 Input 2 Jumper Selections; Figure 2-6 Electromechanical Relay Output - Model Dc330X-Ee-Xxx - Honeywell DC33XB User Manual

Input 2 Jumper
Jumper
Location
W1
Jumper
Position
Slidewire
Input Types
Available
Time Proportional Output
The three types of Time Proportional outputs available on the UDC3300 are shown
in the following figures.
The Alarm wiring connections are the same for all three outputs.
For Control and Alarm Relay Contact information, see Table 2-3 and Table 2-4.
Figure 2-6 shows the Output and Alarm wiring connections for models with
Electromechanical Relay Output.
Output
Relay#1
Output
or Alarm
Relay#2
Alarm
Relay#1
Alarm #2 is not available with Time Proportional Duplex or Three Position Step
1
Control or Position Proportional Control or Current/Time Duplex.
2
Electromechanical relays are rated at 5 Amps @120 Vac or 30 Vdc and
2.5 Amps at 240 Vac.
Customer should size fuses accordingly. Use Fast Blo fuses only.
Figure 2-6 Electromechanical Relay Output – Model DC330X-EE-XXX
12/00

Table 2-2 Input 2 Jumper Selections

W1
W2
W2
Thermocouple, RTD, mV,
Radiamatic, Carbon,
Oxygen, 4-20 mA, 0-20
mA, 1-5 V, 0-5 V
Time Proportional
1
N.C.
2
N.O.
3
4
N.C.
Relay #2 Load
5
N.O.
6
To terminal
4 or 6
7
N.C.
Alarm Relay #1 Load
8
N.O.
9
To terminal
7 or 9
UDC3300 Basic Model: DC33XB User Manual
24162
Relay Load
To terminal
1 or 3
2
Installation
2nd Input
Power/Input PWA
Load
Supply
Power
Load
Supply
Power
2
Load
Supply
Power
2
9