Cisco Nexus 3548 Command Reference Manual page 220

snmp-server enable traps
fspf
license
notify-license-expiry
notify-license-expiry-warning
notify-licensefile-missing
notify-no-license-for-feature
link
rf
redundancy_framework
rmon
fallingAlarm
hcFallingAlarm
hcRisingAlarm
risingAlarm
rscn
snmp
authentication
vsan
zone
default-zone-behavior-change
merge-failure
merge-success
request-reject1
unsupp-mem
Command Default All notifications
Command Modes Global configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines The snmp-server enable traps command enables both traps and informs, depending on the configured
notification host receivers.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
210
(Optional) Enables notifications for the Fabric Shortest Path First
(FSPF).
(Optional) Enables notifications for the license manager.
(Optional) Specifies the license expiry notification.
(Optional) Specifies the license expiry warning notification.
(Optional) Specifies the license file missing notification.
(Optional) Specifies that a notification is sent when no license needs
to be installed for the feature.
(Optional) Enables notifications for uplink and downlink interfaces.
(Optional) Enables notifications for the redundancy framework.
(Optional) Specifies the Redundancy_Framework (RF) supervisor
switchover MIB.
(Optional) Enables notifications for rising, falling, and
high-capacity alarms.
(Optional) Specifies the RMON falling alarm.
(Optional) Specifies the high-capacity RMON falling alarm.
(Optional) Specifies the high-capacity RMON rising alarm.
(Optional) Specifies the RMON rising alarm.
(Optional) Enables RSCN notifications.
(Optional) Enables SNMP authentication notifications.
(Optional) Specifies the SNMP authentication trap.
(Optional) Enables notifications for VSANs.
(Optional) Enables zone notifications.
(Optional) Specifies the default zone behavior change notification.
(Optional) Specifies the merge failure notification.
(Optional) Specifies the merge success notification.
(Optional) Specifies the request reject notification.
(Optional) Specifies the unsupported member notification.
Modification
This command was introduced.
System Management Commands
OL-27851-02