Monitor Erspan Origin Ip-Address - Cisco Nexus 3548 Command Reference Manual

monitor erspan origin ip-address

monitor erspan origin ip-address
To configure the Encapsulated Remote Switched Port Analyzer (ERSPAN) global origin IP address, use
the monitor espan origin ip-address command. To remove the ERSPAN global origin IP address
configuration, use the no form of this command.
Syntax Description
ip-address
global
Command Default None
Command Modes Global configuration mode
Command History Release
6.0(2)A1(1)
Usage Guidelines When you change the origin IP address, it impacts all the sessions.
On a Cisco Nexus 3548 Switch switch, only global origin IP address is supported.
Note
This command does not require a license.
Examples
This example shows how to configure the ERSPAN global origin IP address:
switch# configure terminal
switch(config)# monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
This example shows how to remove the ERSPAN global origin IP address:
switch# configure terminal
switch(config)# no monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
Related Commands Command
monitor session
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
86
monitor erspan origin ip-address ip-address [global]
no monitor erspan origin ip-address ip-address [global]
IP address.
(Optional) Specifies the default global configuration.
Modification
This command was introduced.
Description
Configures a SPAN or an ERSPAN session.
System Management Commands
OL-27851-02