Cisco Nexus 3548 Command Reference Manual page 47

System Management Commands
description
To add a description to a user policy, use the description command. To remove the policy description,
use the no form of this command.
Syntax Descriptiona
policy-description
Defaults
None
Command Modes Applet configuration mode
Command History Release
5.0(3)A1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to a user policy:
switch# configure terminal
switch(config)# event manager applet monitorShutdown
switch(config-applet)# description "Monitors interface shutdown"
This example shows how to remove the policy description:
switch(config-applet)# no description "Monitors interface shutdown"
switch(config-applet)#
Related Commands Command
description
event
show event-manager
policy state
tag
OL-27851-02
description policy-description
no description policy-description
Policy description. The description can be any case-sensitive, alphanumeric
string up to 80 characters enclosed by quotation marks.
Modification
This command was introduced.
Description
Configures a descriptive string for the policy.
Configures the event statement for the policy.
Correlates multiple events in the policy.
Displays information about the status of the configured policy.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
description
37