Cisco Nexus 3548 Command Reference Manual page 161

System Management Commands
Time in microseconds
•
Error description string
•
Current process name and identification
•
Kernel jiffies
•
Stack trace
•
show logging onboard memory-errors
The show logging onboard memory-errors command displays the history of Parity, Single ECC, and
Double ECC errors that are detected on various device memory. See the following example output for
the parity errors that are detected on MAC block memory:
switch(config-if)# show logging onboard memory-errors
----------------------------
OBFL Data for
Module:
----------------------------
:
Sun Jun 21 22:49:22 2015@665506
MEMORY::MB:: [#8] PARITY Error detected on MAC BLOCK - Interrupt
3852(MTC_MB_MAC_TBL_RAM_DLEFT_RPM1_PERR_INTR_4), Offset 0x3de, Total Errors in MAC block
106
Sun Jun 21 22:49:22 2015@665573
MEMORY::MB:: [#8] PARITY Error: RPM 1, HW entry: rpm addr 0x107de, vld 1, mac 0x300ff25,
fid 5, adj 0, rsvd 0, lid 8, lif 23, non existent 0, local 1
Sun Jun 21 22:49:22 2015@665612
MEMORY::MB:: [#8] PARITY Error: RPM 1, SW entry: index = 32232, vld 0x1, mac
0x25ff00030000, vlan 1, port 7, flags 0
Sun Jun 21 22:49:22 2015@665688
MEMORY::MB:: [#8] PARITY Error at rpm1 of bank #1, is a soft failure. MAC entry at RPM
addr 0x107de Index 32232 has been cleared.
Sun Jun 21 22:51:02 2015@671711
MEMORY::MB:: [#9] PARITY Error detected on MAC BLOCK - Interrupt
3851(MTC_MB_MAC_TBL_RAM_DLEFT_RPM0_PERR_INTR_4), Offset 0xc, Total Errors in MAC block 107
Sun Jun 21 22:51:02 2015@671803
MEMORY::MB:: [#9] PARITY Error: RPM 0, HW entry: rpm addr 0x1000c, vld 1, mac 0x300cd7e,
fid 5, adj 0, rsvd 0, lid 8, lif 23, non existent 0, local 1
Sun Jun 21 22:51:02 2015@671843
MEMORY::MB:: [#9] PARITY Error: RPM 0, SW entry: index = 200, vld 0x1, mac 0x7ecd00030000,
vlan 1, port 7, flags 0
Sun Jun 21 22:51:02 2015@671910
MEMORY::MB:: [#9] PARITY Error at rpm0 of bank #0, is a soft failure. MAC entry at RPM
addr 0x1000c Index 200 has been cleared.
Sun Jun 21 22:57:42 2015@716752
MEMORY::MB:: [#10] PARITY Error detected on MAC BLOCK - Interrupt
3788(MTC_MB_MAC_TBL_RAM_DLEFT_RPM0_PERR_INTR), Offset 0x2ee, Total Errors in MAC block 108
Sun Jun 21 22:57:42 2015@716841
MEMORY::MB:: [#10] PARITY Error: RPM 0, HW entry: rpm addr 0x2ee, vld 1, mac 0x300be27,
fid 5, adj 0, rsvd 0, lid 8, lif 23, non existent 0, local 1
Sun Jun 21 22:57:42 2015@716882
OL-27851-02
1
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
show logging onboard
151