Ptp Domain - Cisco Nexus 3548 Command Reference Manual

ptp domain

ptp domain
To configure a domain number for the Precision Time Protocol (PTP) clock, use the ptp domain
command. To remove the domain configuration for the PTP clock, use the no form of this command.
Syntax Description
domain_number
Command Default 0
Command Modes Global configuration mode
Command History Release
6.0(2)A1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a domain number for the PTP clock:
switch# configure terminal
switch(config)# ptp domain 6
switch(config)#
This example shows how to remove the PTP domain configuration:
switch# configure terminal
switch(config)# no ptp domain 6
switch(config)#
Related Commands Command
feature ptp
ptp priority1
ptp priority2
ptp source
show ptp brief
show ptp clock
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
106
ptp domain domain_number
no ptp domain domain_number
Domain number. The range is from 0 to 128.
Modification
This command was introduced.
Description
Enables or disables PTP on the device.
Configures the priority1 value to use when advertising this clock.
Configures the priority2 value to use when advertising this clock.
Configures the source IP address for all PTP packets.
Displays the PTP status.
Displays the properties of the local clock.
System Management Commands
OL-27851-02