Show Startup-Config Ptp - Cisco Nexus 3548 Command Reference Manual

show startup-config ptp

show startup-config ptp
To display the Precision Time Protocol (PTP) startup configuration, use the show startup-config ptp
command.
Syntax Description all
Command Default
Displays only the configured information.
Command Modes EXEC mode
Command History Release
6.0(2)A1(1)
Examples
This example shows how to display the PTP startup configuration:
switch# show startup-config ptp
!Command: show startup-config ptp
!Time: Wed Mar 13 08:10:00 2013
!Startup config saved at: Wed Mar 13 08:09:56 2013
version 6.0(2)A1(1)
feature ptp
ptp domain 1
ptp source 192.0.2.1
ptp priority1 10
ptp priority2 20
interface Ethernet1/5
ptp
ptp vlan 5
ptp delay-request minimum interval 2
switch#
This example shows how to display the entire PTP startup configuration, including the default values:
switch# show startup-config ptp all
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
198
show startup-config ptp [all]
(Optional) Displays all the default and configured information.
Modification
This command was introduced.
System Management Commands
OL-27851-02