Cisco Nexus 3548 Command Reference Manual page 29

System Management Commands
You cannot add user-defined CLI show commands to the CiscoTAC-1 destination profile.
Note
You can add show commands only to full text and XML destination profiles. Short text destination
profiles do not support additional show commands because they only allow 128 bytes of text.
Examples
This example shows how to add a show command output to a Call Home message sent for an alert group:
switch(config-callhome)# alert-group configuration user-def-cmd "show running-config"
switch(config-callhome)#
Related Commands Command
copy running-config
startup-config
show callhome
user-def-cmd
OL-27851-02
Description
Saves this configuration change.
Displays information about all user-defined show commands added to alert
groups.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
alert-group (Call Home)
19