Cisco Nexus 3548 Command Reference Manual page 239

System Management Commands
streetaddress (Call Home)
To configure the street address for the primary person responsible for the switch, use the streetaddress
command. To remove the street address, use the no form of this command.
Syntax Description
address
Command Default
None
Command Modes Callhome configuration mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to configure the street address for the primary person responsible for the
switch:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# streetaddress 170 West Tasman Drive, San Jose, CA 95134-1706
switch(config-callhome)#
Related Commands Command
contract-id
copy running-config
startup-config
show callhome
OL-27851-02
streetaddress address
no streetaddress
Street address. The address can be a maximum of 255 alphanumeric
characters and can include white spaces.
Modification
This command was introduced.
Description
Configures the contract number for the switch.
Saves this configuration change.
Displays a summary of the Call Home configuration.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
streetaddress (Call Home)
229