Cisco Nexus 3548 Command Reference Manual page 240

switch-priority (Call Home)
switch-priority (Call Home)
To configure the switch priority for the switch, use the switch-priority command. To remove the switch
priority, use the no form of this command.
Syntax Description
priority-value
Command Default
Default priority is 7
Command Modes Callhome configuration mode
Command History Release
5.0(3)A1(1)
Examples This example shows how to configure the switch priority:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# switch-priority 5
switch(config-callhome)#
Related Commands Command
show callhome
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
230
switch-priority priority-value
no switch-priority
Switch priority value. The range is from 0 to 7, with 0 being the highest
priority and 7 the lowest.
Modification
This command was introduced.
Description
Displays a summary of the Call Home configuration.
System Management Commands
OL-27851-02