Rmon Hcalarm - Cisco Nexus 3548 Command Reference Manual

System Management Commands

rmon hcalarm

To configure a high-capacity Remote Monitoring (RMON) alarm, use the rmon hcalarm command. To
remove a high-capacity RMON alarm, use the no form of this command.
Syntax Description alarm-no
MIB-obj
sample-interval
absolute
delta
startupalarm
startup-alarm-type
rising-threshold
rising-threshold-value
event-index
falling-threshold
fall-threshold-value
owner name
Command Default None
Command Modes
Global configuration mode
Command History Release
5.0(3)A1(1)
OL-27851-02
rmon hcalarm alarm-no MIB-obj sample-interval {absolute | delta} startupalarm
startup-alarm-type rising-threshold rising-threshold-value event-index falling-threshold
fall-threshold-value [event-index] [owner name]
no rmon hcalarm alarm-no MIB-obj sample-interval {absolute | delta} startupalarm
startup-alarm-type rising-threshold rising-threshold-value event-index falling-threshold
fall-threshold-value [event-index] [owner name]
Alarm number. The range is from 1 to 65535.
MIB object to monitor.
The MIB object must be an existing SNMP MIB object in standard dot
notation; for example, 1.3.6.1.2.1.2.2.1.17.83886080.
Sample interval at which the switch collects a sample value of the MIB
object. The range is from 1 to 700000 seconds.
Specifies the sample type as absolute.
Specifies the sample type as delta.
Configures the startup alarm type.
Startup alarm type. The range is from 1 to 3, where 1 is rising, 2 is falling,
and 3 is rising or falling.
Configures the rising threshold value at which the switch triggers a rising
alarm or resets a falling alarm.
Rising threshold value. The range is from 0 to 18446744073709551615.
Event or action that the switch takes when an alarm, rising or falling,
triggers. The event index range is from 0 to 65535.
Configures the falling threshold value at which the switch triggers a falling
alarm or resets a rising alarm.
Falling threshold value. The range is from 0 to 18446744073709551615.
Note
(Optional) Specifies an owner for the alarm. The name can be any
alphanumeric string.
Modification
This command was introduced.
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
The falling threshold value must be less than the rising threshold.
rmon hcalarm
119