Table of Contents
Advertisement
Resident Test Program Overview
lows a detailed list of errors to be scanned which can di-
rectly indicate component failures.
Note
If the Diagnostic Monitor mode is entered accidentally
(by pressing S1 once when the Self Test Routine
number is displayed, or by pressing S1 then [2] on the
keypad during normal operation), the word HELP will
appear on the Main Panel Display. This mode can be ex-
ited to resume normal operation, if there are no failures,
by either pressing REJ (Reject) or by the following pro-
cedure:
Press S1 to enter the Cyclic Self Test, wait until the Self
Test result number is displayed, then press ENTER on
the keypad.
4-22
The Diagnostic Monitor is for use by qualified
maintenance personnel, but limited use is de-
scribed in Chapter 9 for the readout of error
messages.
M10-94400-1
Advertisement
Table of Contents
