Power Requirements; Strip Chart Recorder Supplies - Instron 4400 Series Operator's Manual

Strip Chart Recorder
Table 6-1.
Part Number
3750-135
3750-137
3750-136
2750-138
3740-147
3740-148

Power Requirements

The Strip Chart Recorder is set at the factory to accept a
main power input of 120 ±10 Va.c., single phase. A 3-wire
power cable for this voltage is included. If the power source
to be used is not 120 ±10 Va.c., the power input switch on
the underside of the recorder can be set for other voltages in
the range of 100 to 240 Va.c. (refer to Table 6-2).
To adapt the Strip Chart Recorder for a different line
voltage, set the input power switch to the proper input
voltage for your location. Be sure the line fuse is the
6-6

Strip Chart Recorder Supplies

Description
Fan Fold Paper,
metric units
Fan Fold Paper,
U.S. Customary
units
Roll Paper, metric
units
Roll Paper, U.S.
Customary units
Pens, red
Pen 1 for all
recorders
Pens, black
Pen 1 for all
recorders
M10-94400-1
Quantity
10/box
10/box
10 rolls/box
10 rolls/box
5 pens/pkg
5 pens/pkg