Cabling for Optional Equipment
Cables
For Series 4400 systems, a recorder, printer and com-
puter connect directly to the rear panel of the console, us-
ing the cables provided with these options (see Table
3-1). The cables for load and strain measuring devices
plug into connectors on the devices themselves, as de-
scribed in the system load frame manual. Thus, you usu-
ally will not have to open the console as part of the
installation procedure.
Table 3-1.
Series 4400 Console Option Cables
OPTIONAL
CABLE ASSEMBLY
ACCESSORY
X-Y Recorder
Strip Chart
Recorder
Extensometers
(all types)
Printer
(Supplied with Printer)
Computer
Analog Output Connector
The Analog Output connector on the rear panel of the
console is used to connect to a chart recorder, a strip
chart recorder, or other data acquisition device. This con-
nector is a 9-pin, miniature, female "D" connector, that
has the pin assignments shown in Table 3-2.
Console Connections
A570-26
A570-26
(Supplied with
Extensometer)
144-1-35
CONSOLE
CONNECTOR
ANALOG OUT
ANALOG OUT
STRAIN
RS-232
IEEE
3-9