Mounting The Console Bracket - Instron 4400 Series Operator's Manual

Console Connections
(b) Insert a socket head cap screw in each of the four
(c) With all screws in place, tighten the screws evenly
(d) Attach the sliding bracket to the pivot bracket using
(e) Lightly tighten the thumbscrews (these will be tight-

Mounting the Console Bracket

To mount the console on the load frame column:
(a) Place the console bracket against the side of the col-
(b) Slide the bracket up or down in the groove to a con-
(c) Loosen the rotational securing screws and rotate the
(d) Go to the next section to install cables.
3-4
mounting holes and hand tighten.
until all are secure.
the pins provided.
ened firmly when the console is mounted on the load
frame and a comfortable viewing position has been
selected).
umn (or column extension) so that the T-nuts of the
friction devices are in the grooves of the load frame
column cover.
venient height for comfortable operation. Tighten
both friction knobs by hand, but avoid over-tighten-
ing.
bracket to one of four positions for a comfortable
viewing angle. Tighten the thumbscrews firmly, but
do not over-tighten.
M10-94400-1