Connectinga Laptop I N Terminal Mode T O Emulatea Printer; Terminal Mode Programming Froma Laptop Computer - Notifier 1010 Installation And Programming Manual

P 18
AGE
C A L
ONNECTING
A Laptop computer can be used in lieu of a printer for uploading the history file or capturing reports
from the fire panel.
Set the Laptop up in terminal mode, and connect as per the instructions above for connecting a
printer to the SIB card. (Terminals 2, 3, & 4).
Place the Laptop in "terminal mode" (Hyperterm or equivalent) and set with the following
options for the COM port.
2400 Baud.
7 Data bits.
1 Stop Bit.
Even Parity.
Xon/Xoff handshaking.
Select "Capture text to file" in the Terminal Mode program on the Laptop.
Then Press the Special Function button on the 1010/2020 Panel,
and press "2=HIS", and follow the prompts.
The 1010/2020 panel will now upload the entire history log to the Laptop computer which can then
be saved to disk for permanent records.
T M P
ERMINAL ODE
A Laptop computer can also be used in Terminal Mode to operate and program the panel in lieu of
using the system keypad. This makes for much faster input of device descriptions etc when not
TM
using Verifier .
Terminal Mode Settings:
2400 Baud.
7 Data bits.
1 Stop Bit.
Even Parity.
Xon/Xoff.
SIB DB9
10 Tx Rx 2
11 ref Ref 5
12 Rx Tx 3
I T
APTOP N ERMINAL
F
ROGRAMMING ROM
DB25
Rx 3
ref 7
Tx 2
C
OPYRIGHT
M T E
ODE O MULATE
A L C
APTOP OMPUTER
Contact Notifier Inertia Fire Systems for
Function key setting in Terminal Mode.
© 2000, N I P
OTIFIER NERTIA
1010/2020 I
NSTALLATION
A P
RINTER
L
TY TD
A P M
ND ROGRAMMING ANUAL