Output Modules; Software Zones - Notifier 1010 Installation And Programming Manual

P 66
AGE
O M
UTPUT ODULES
• These software types do have control-by-event programming capability.
Type ID
CMXC CMX FORM C
CMXS CMX
CONTROL
CON* CONTROL
FORC* FORM C
RELAY
FRCM FORMC
MANUAL
Note: Although each type ID listed above is prompted for Signal Silence during programming only
those CON and FORC will isolate by using the "EXT BELL ISOLATE" button.
S Z
OFTWARE ONES
Type I.D.
FZON FORWARD ZONE
RZON REVERSE ZONE
A Forward-Activating Zone is a software zone, which once activated by an input device or
•
other forward zone may in turn activate other zones and/or output devices directly.
Zones and output devices activated by a forward zone have that forward zone contained in
their CBE List.
• A Reverse-Activating Zone is a software zone, which if not activated directly by an input
device or forward zone may be activated through an associated CBE equation. A Reverse
Zone may be referenced in other CBE Equations.
CMX Control Module or an XP5-C
used as a Relay Output
CMX Control Module or an XP5-C
used as a Monitored Output
CMX Control Module or an XP5-C
used as a Monitored Output (Bell) or
a Sounder Base
CMX Control Module or an XP5-C
used as a
FORM-C Relay.
CMX Control Module or an XP5-C
used as a FORM-C Relay. This
device does not deactivate when a
system reset occurs. This module
can be used for fan control
applications where a latching plant trip
is required and can be mapped only to
an AFCM Annunciator point.
Display Label
C
OPYRIGHT
Application
Type of Device
A software-defined zone that is forward-
activating.
A software-defined zone that is reverse-
activating.
© 2000, N I P
OTIFIER NERTIA
1010/2020 I
NSTALLATION
Bell
Isolate
No
No
Yes
Yes
No
L
TY TD
A P M
ND ROGRAMMING ANUAL
Break
Tabs
Yes
No
No
Yes
Yes