Alarm Limits; Units - TESTO 330 Instruction Manual

Options:
> [Options]
measuring values per display page.
> [Options]
the selected line.
> [Options]
> [Options]
factory setting
Pos: 47 /TD/Produkt verwenden/testo 330/testo 330 Alarschwellen @ 6\mod_1279021018511_79.doc @ 65490 @
6.1.2.2.

Alarm limits

Alarm limits can be set for several display parameters. An audible
alarm signal is triggered when the alarm limit is reached.
Calling up the function:
> [
Switching alarm signals on / off, changing alarm limits:
1. Select function or parameter: [▲],
2. Set parameter: [▲],
3. Save changes: [Finished].
Pos: 48 /TD/Produkt verwenden/testo 330/testo 330 Einheiten @ 6\mod_1279022297845_79.doc @ 65521 @
6.1.2.3.

Units

The units used for parameters in configuration menus can be set.
Calling up the function:
> [
Adjustable units
Parameter
Length
Pressure
1. Select the line: [▲], [▼]→ [Edit].
2. Select the unit to be changed: [▲],
3. Confirm the entry: [Finished].
Pos: 49 /TD/Produkt verwenden/testo 330/testo 330 Datum_Uhrzeit @ 6\mod_1279023342203_79.doc @ 65553 @
→
Number of
→
Insert Empty
→
Delete
→
Factory
→
] Instrument Settings
[▼]
→
] Instrument Settings
Unit
m,
mbar,
Lines: Change the number of
Lines: Insert the empty line before
Line: Delete the selected line.
Setting: Reset the readings display to
→ →
[OK]
[▼]
and partly [◄], [►]→ [OK].
→ →
[OK]
ft
hPa
[▼]
6 Using the product
→
Alarm Limits
→ [Edit].
→
Units [OK]
→ [OK].
[OK]
35