Switching Off; Folders / Locations - TESTO 330 Instruction Manual

5.2.9.

Switching off

> Press
- Possibly: The pump starts and the sensors are rinsed until the
switch-off thresholds (O2 > 20 %, other measurement
parameters < 50 ppm) are reached. The maximum rinsing
period is 3 minutes.
- The measuring instrument switches off.
Pos: 38 /TD/Erste Schritte/testo 330/testo 330 Produkt kennenlernen Ordner_Messorte @ 6\mod_1278942335615_79.doc @ 65332 @
5.3.

Folders / Locations

All readings can be saved under the currently active location.
Readings not yet saved are lost when the measuring instrument is
switched off.
Folders and locations can be created, edited, copied and activated.
Folders and locations (incl. protocols) can be deleted.
Calling up a function:
> [
Adapting the display:
> Toggle between overview (display of number of locations per
folder) and detailed view (display of all locations per folder):
[Overview]
Activating a location:
> Select the location → [OK].
- The location is activated and the menu
opened.
Creating a new location:
A location is always created in a folder.
1. Select the folder in which the location is to be created.
2. [Options]
3. Enter values or make settings.
4. Finalise the entry: [Finished].
Unsaved measuring values will be lost when the flue gas
analyser is switched off.
[ ] .
→
] Folder/Locations
or [Details].
→ New/Location→ [OK].
→
[OK] .
Measurements
5 First steps
is
29