Table of Contents
Advertisement
Scanner(s)-to-Cradle Support
Parameter Broadcast (Cradle Host Only)
Parameter # 148
When Parameter Broadcast is disabled on one scanner in the piconet, Parameter Broadcast
is disabled on all scanners in the piconet.
When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter
programming symbols scanned to all other scanners in the piconet. If disabled, parameter
programming symbols are processed by the individual scanner only, and the scanner
ignores parameters broadcast from other scanners or from the cradle.
*
Enable Parameter Broadcast
(1)
Disable Parameter Broadcast
(0)
4-38
HS-360X Handheld DPM Scanner User Manual
Advertisement
Table of Contents
