Table of Contents
Advertisement
Scanning Sequence Examples
In most cases scanning one programming symbol sets the parameter value. For example,
to disable image capture illumination, scan the Disable Image Capture Illumination
programming symbol under Image Capture Illumination. The scanner issues a fast
"warble" beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several programming symbols. See these parameter
descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan
the correct parameter.
Imaging Preferences Parameter Defaults
The table below lists the defaults for imaging preferences parameters. To change the
default values, scan the appropriate programming symbols in this guide. These new values
replace the standard default values in memory.
Appendix A — Standard Default Parameters
See
and default parameters.
Parameter
Imaging Preferences
Image Size (Number of Pixels)
JPEG Image Options
JPEG File Size
JPEG Quality and Size Value
Image File Format
HS-360X Handheld DPM Scanner User Manual
for all user preferences, hosts, symbologies,
Parameter Number
302
299
561
305
304
Imaging Preferences
Default
Full Resolution
JPEG Quality Selector
160 kb
65
JPEG
6-3
Advertisement
Table of Contents
