Omron HS-360X User Manual page 25

Installing the HS-360X Interface Cable
1. Insert cable fully so that the connector is flush with the scanner surface.
Inserting Cable into HS-360X
2. Loosen metal lock plate screw using a PH1 driver.
Loosening HS-360X Lock Plate Screw
3. Slide lock plate to fully locked position.
Sliding Lock Plate into Locked Position
HS-360X Handheld DPM Scanner User Manual
Important: Be sure the interface cable is pushed
all the way into the connector before closing and
fastening the lock plate.
Quick Start
1-15