Table of Contents
Advertisement
FN1 Substitution Values
Key Category Parameter # 103
Decimal Value Parameter # 109
The wedge and USB HID keyboard hosts support a FN1 Substitution feature. Enabling
this substitutes any FN1 character (0x1b) in an EAN128 barcode with a value. This value
defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category
parameter to 1, then set the 3-digit keystroke value. See the ASCII Character Set table for
the current host interface for the desired value.
To select a FN1 substitution value via programming symbol menus:
1. Scan the programming symbol below.
Set FN1 Substitution Value
2. Locate the keystroke desired for FN1 Substitution in the ASCII Character Set table
for the current host interface. Enter the 4-digit ASCII Value by scanning each digit in
Appendix H — Numeric
To correct an error or change the selection, scan Cancel.
To enable FN1 substitution for USB HID keyboard, scan the Enable FN1 Substitution
programming symbol.
HS-360X Handheld DPM Scanner User Manual
User Preferences and Miscellaneous Options
Keyboard.
5-45
Advertisement
Table of Contents
