Omron HS-360X User Manual page 19

Charging the HS-360X Battery
When using a new battery in the HS-360X, the battery requires a charge to be enabled.
Insert the battery in the HS-360X and place the HS-360X in the cradle.
The battery begins charging when the cradle's LED indicator starts blinking amber. The
HS-360X's battery has completed a charge when the cradle's LED indicator is solid green. A
complete charge of a fully discharged battery can take up to three hours using external
power and up to ten hours using USB power over the USB interface cable.
To avoid a battery temperature fault, always charge the battery in the scanner within the
recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal.
Inserting the HS-360X Scanner in the Cradle
To insert the scanner in the cradle:
1. Insert the scanner into the cradle top first.
2. Push the handle until it clicks into place, engaging the contacts in the cradle and scanner.
Inserting the Scanner in the Cradle
HS-360X Handheld DPM Scanner User Manual
Quick Start
1-9